Inside Mount: Bali Blinds - How to Install Vinyl Roller Shades

Video Transcript

Roller shades are beautiful and easy to install. And cordless control options have been certified as Best for Kidsâ„¢ by an independent lab. In this video, we'll show you how to mount roller shades inside your window frame, step by step.

First, take a look at the installation guide that was included with your shade. Now make sure you have all of the parts and all of the tools you'll need, and if you're installing into anything other than wood, get the appropriate screws and anchors.

Start by making a mark 1 inch in from the front top corner of the window casing. Then hold the brackets up to the marks, and mark the screw locations. Next, drill the holes for the screws with a 1/16-inch drill bit, and screw the brackets securely into place.

Now you're ready to mount your shade. Mount the shade, round pin end first. Then push in the spring-loaded idle end, center it over the bracket, and release it so that it snaps into the bracket hole. That's it, you're done.

If you had any trouble following these steps or need to know how to care for and clean your new shade, check your installation guide or visit our website. The Window Covering Safety Council recommends cordless window coverings that are certified Best for Kids.